EN

Knowledge

Decoding Chinese Mining Cable Designations: UC, UCP, UCPJB, UY, UYPT

Chinese mining cable designations open with U for mine use and build up letter by letter — C for the coal-excavator family, Y for mine-moving, P for a screen, T for a metal screen, J for a monitoring core — across rated voltages from 0.38/0.66 kV to 8.7/10 kV under GB/T 12972-2008 and MT 818-2009.

The flexible rubber cable for mining purpose is built for movable electrical appliances and excavators in the mine, working in a humid environment. Its designations look opaque at first — UC, UCP, UCPJB, UCPJR, UCPT, UCPTJ, UY, UYP, UYPT, UYPTJ — but the code is strictly positional, and once the letters are unpacked the full construction of the cable is visible in the type. This article decodes each letter, then walks the two families and their voltage ladder. The catalogue’s executive standard pairing for these cables is GB/T 12972-2008 / MT 818-2009, with flame-retardant versions manufactured according to IEC 60332-2000 & GB/T 18380-2001.

MYPTJ mining cable code breakdown showing each letter decoded: mine use, mine-moving family, screen, metal screen and monitoring core

The U prefix and the two families

Every U-series designation in the catalogue begins with U, the mine-use prefix — the product list itself names the family “Rubber Mine used cable”. The second letter picks the sub-family: C marks the coal-excavator types (UC and derivatives, for coal excavator used rubber covered flexible cable), Y the mine-moving types (UY and derivatives, for mine moving rubber covered flexible cable). Each type is also listed with a paired designation — UC/MC, UCP/MCP, UY/MY — so the same construction appears under two two-letter heads in the catalogue tables.

Letter by letter

The remaining letters add function, each one visible in the full type names:

Mining cable designation letters decoded from the catalogue type names
LetterMeaningSeen in
UMine use — opens every U-series designationUC, UY, UCP, UYPT…
CCoal-excavator familyUC — coal excavator used rubber covered flexible cable
YMine-moving familyUY — mine moving rubber covered flexible cable
PScreenUCP — coal excavator used rubber covered with screen flexible cable
TMetal screenUCPT — coal excavator used rubber covered with metal screen flexible cable
JMonitoring coreUCPTJ — with metal screen and monitoring core
B (after J)Braid reinforcementUCPJB — with screen, monitoring core and braid reinforced
R (after J)Wrapped reinforcementUCPJR — with screen, monitoring core and wrapped reinforced
BP- (prefix)Parallel listing in the dimension tables; the catalogue does not expand the prefixBP-UCPT, BP-UCPTJ, BP-UY, BP-UYP

Reading a code is therefore mechanical: UCPJB is a mine-use coal-excavator cable with screen, monitoring core and braid reinforcement; UYPTJ is a mine-moving cable with metal screen and monitoring core. The voltage-class article explains the U0/U figures that follow these codes.

The excavator family: UC and its derivatives

The UC types serve the machinery that cuts and loads at the face. The base UC is an unscreened flexible cable at 0.38/0.66 kV; adding P, T, J and the reinforcement letters builds the rest of the family, and the voltage class rises with the screening and the machine served:

Coal-excavator family — sections 10–150 mm² throughout
TypeVoltage class U0/UCatalogue name
UC / MC0.38/0.66 kVCoal excavator used rubber covered flexible cable
UCP / MCP0.38/0.66, 0.66/1.14, 1.9/3.3 kVCoal excavator used rubber covered with screen flexible cable
UCPJB / MCPJB0.66/1.14, 1.9/3.3 kVCoal excavator used rubber covered with screen, monitoring core and braid reinforced flexible cable
UCPJR / MCPJR0.66/1.14, 1.9/3.3 kVCoal excavator used rubber covered with screen, monitoring core and wrapped reinforced flexible cable
UCPT / MCPT0.66/1.14, 1.9/3.3 kVCoal excavator used rubber covered with metal screen flexible cable
UCPTJ / MCPTJ0.66/1.14, 1.9/3.3 kVCoal excavator used rubber covered with metal screen and monitoring core flexible cable

The mine-moving family: UY and its derivatives

The UY types are the trailing and moving-power family, and they climb the whole voltage ladder — UYPTJ reaches 8.7/10 kV, the highest rating in the flexible catalogue:

Mine-moving family — sections 10–150 mm² throughout
TypeVoltage class U0/UCatalogue name
UY / MY0.38/0.66 kVMine moving rubber covered flexible cable
UYP / MYP0.38/0.66, 0.66/1.14, 3.6/6 kVMine moving rubber covered with screen flexible cable
UYPT / MYPT1.9/3.3, 3.6/6 kVMine moving rubber covered with metal screen flexible cable
UYPTJ / MYPTJ3.6/6, 6/10, 8.7/10 kVMine moving rubber covered with metal screen and monitoring core flexible cable

The series pages carry these families with full dimension tables: UC / UCP coal-excavator cables and UY / UYP mine-moving cables.

Mining cable voltage ladder staircase from 0.38/0.66 kV to 8.7/10 kV with type groups on each step

The BP- prefix: parallel table listings

The dimension tables also list BP-prefixed versions — BP-UCPT / BP-MCPT, BP-UCPTJ / BP-MCPTJ, BP-UY / BP-MY and BP-UYP / BP-MYP — as parallel listings beside the base types; the catalogue does not expand the prefix, so confirm the BP- build sheet with the engineers before specifying. The property standards around the family are explicit in their own right: flame-retardant cable is manufactured according to IEC 60332-2000 & GB/T 18380-2001, alongside the halogen-free (IEC 60754 & GB/T 17650) and low-smoke (IEC 61034 & GB/T 17651) addenda. Underground coal work puts cable alongside people and combustible material in a humid environment, so the flame-retardant options, the screens and the monitoring cores are read together: the screen (P) or metal screen (T) protects the power cores, while the monitoring core lets the control system watch the cable itself.

Service properties specific to mining cable

The using properties for the mining family differ from the rubber flexible and shipboard families in three numbers worth remembering:

Using properties — mining cables to GB/T 12972-2008 / MT 818-2009
PropertyRequirement
Rated voltage U0/U0.38/0.66 kV up to 6/10 kV (type table reaches 8.7/10 kV)
Voltage withstand test3.5 × U0 for 5 min, without puncture
Operating temperatureAmbient not lower than −10°C; conductor not above 90°C
Minimum working bending radius≥6×D for D≤25 mm; ≥8×D for D>25 mm
SunlightNot designed for prolonged exposure to sunlight — underground duty

The 90°C conductor limit and the wider bending radii (6×D and 8×D, against 4×D and 6×D for ordinary rubber flexible cable) reflect the duty: these cables are dragged, reeled and re-laid continuously. A representative construction shows how the letters translate into layers — UCP / MCP at 0.38/0.66 kV, with its 0.7 mm screen layer:

UCP / MCP coal-excavator cable with screen — 0.38/0.66 kV, selected sizes
Core × section mm²Wire dia. mmConductor No.Insulation TH mmScreen TH mmSheath TH mmOverall dia. mmWeight kg/km
3×10+3×4.0/3+3×2.50.251921.60.74.530.11493
3×16+3×6.0/3+3×2.50.302081.60.74.531.71742
3×25+3×8/3+3×2.50.303151.80.75.536.02285
3×35+3×12/3+3×2.50.304411.80.75.538.62747
3×50+3×16/3+3×2.50.306302.00.75.542.73523
3×95+3×35/3+3×2.50.3011972.20.76.051.95553
3×150+3×50/3+3×2.50.3019002.40.76.059.77910

The core structures tell their own story: three power cores, a set of protective-earth/auxiliary cores and the monitoring elements — UCPJB at 0.66/1.14 kV, for example, is built as 3×10+1×6+3×1.5+3×1.5. For the full range across both families, start from the mining cable category; for constructions to other standards, see Custom by Standard, and for direct quotations send the type code through the RFQ form.

UCPJB mining cable cross-section with three power cores, earth core, auxiliary and monitoring cores, screen and braid reinforcement

FAQ

Chinese Mining Cable Codes — Quick Answers

U is the mine-use prefix that opens every U-series designation in the catalogue — the product family is listed as “Rubber Mine used cable”. The next letter picks the sub-family: C for the coal-excavator types (UC), Y for the mine-moving types (UY). The catalogue also lists paired designations for the same construction, such as UC/MC and UY/MY.
Both are coal-excavator cables with screen, monitoring core and reinforcement; they differ only in how the reinforcement is applied. UCPJB is braid reinforced (B after J), while UCPJR is wrapped reinforced (R after J). Both are listed at 0.66/1.14 and 1.9/3.3 kV in sections 10–150 mm².
BP-UCPT, BP-UCPTJ, BP-UY and BP-UYP appear in the catalogue’s dimension tables as parallel listings beside the base types — the catalogue does not expand the prefix, so confirm the BP- build sheet with the engineers before specifying. The property standards cited for the family are explicit in their own right: flame-retardant cable is manufactured according to IEC 60332-2000 & GB/T 18380-2001, alongside the halogen-free and low-smoke addenda.
The monitoring core (the J in UCPTJ, UYPTJ and UCPJB) is a dedicated core in the cable assembly that lets the machine’s control and protection system watch the cable condition while the power cores feed the excavator or moving equipment. It appears exactly where the catalogue names require it — in the metal-screened and reinforced types used on sophisticated face machinery.
No — the using properties rule out long-term sunlight exposure. These are underground-duty constructions for humid mine environments; sustained UV exposure is outside their design. For outdoor moving duty, the weather-resistant W types of the rubber flexible family are the appropriate specification.

Mine-Spec Sourcing

Send us your cable schedule — even for 500 m.

Type code, voltage class, core structure: our engineers review the construction against GB/T 12972 and MT 818, and revert with a quotation, a sampling plan and the flame-retardant route. Small runs of standard UC and UY series start at 500 m; samples are available for evaluation.

Send Your Drawing Browse Mining Cables